R162282420 Linear Runner Block Bearing 20x44x25.35mm Size Chart (mm/inches) |
|---|
| Bearing number | 71952 ACD/HCP4AL |
| Size (mm) | 360x260x46 |
| Bore Diameter (mm) | 360 |
| Outer Diameter (mm) | 260 |
| Width (mm) | 46 |
| d | 260 mm |
| D | 360 mm |
| B | 46 mm |
| d1 | 291.8 mm |
| d2 | 291.8 mm |
| D1 | 328.2 mm |
| b | 4 mm |
| C1 | 24.9 mm |
| C2 | 7.1 mm |
| C3 | 6.7 mm |
| r1,2 - min. | 2.1 mm |
| r3,4 - min. | 1.1 mm |
| a | 95.5 mm |
| da - min. | 271 mm |
| db - min. | 271 mm |
| Da - max. | 349 mm |
| Db - max. | 354 mm |
| ra - max. | 2 mm |
| rb - max. | 1 mm |
| dn | 299.7 mm |
| Basic dynamic load rating - C | 265 kN |
| Basic static load rating - C0 | 400 kN |
| Fatigue load limit - Pu | 9.6 kN |
| Limiting speed for grease lubrication | 3600 r/min |
| Limiting speed for oil lubrication | 5300 mm/min |
| Ball - Dw | 30.162 mm |
| Ball - z | 29 |
| Gref | 150 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 0.87 |
| Calculation factor - Y0 | 0.38 |
| Calculation factor - X2 | 0.41 |
| Calculation factor - Y1 | 0.92 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Preload class A - GA | 1650 N |
| Preload class B - GB | 3300 N |
| Preload class C - GC | 6600 N |
| Preload class D - GD | 13200 N |
| Calculation factor - f | 1.24 |
| Calculation factor - f1 | 0.98 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.07 |
| Calculation factor - f2C | 1.12 |
| Calculation factor - f2D | 1.17 |
| Calculation factor - fHC | 1.04 |
| Preload class A | 683 N/micron |
| Preload class B | 895 N/micron |
| Preload class C | 1189 N/micron |
| Preload class D | 1615 N/micron |
| d1 | 291.8 mm |
| d2 | 291.8 mm |
| D1 | 328.2 mm |
| C1 | 24.9 mm |
| C2 | 7.1 mm |
| C3 | 6.7 mm |
| r1,2 min. | 2.1 mm |
| r3,4 min. | 1.1 mm |
| da min. | 271 mm |
| db min. | 271 mm |
| Da max. | 349 mm |
| Db max. | 354 mm |
| ra max. | 2 mm |
| rb max. | 1 mm |
| dn | 299.7 mm |
| Basic dynamic load rating C | 265 kN |
| Basic static load rating C0 | 400 kN |
| Fatigue load limit Pu | 9.65 kN |
| Attainable speed for grease lubrication | 3600 r/min |
| Attainable speed for oil-air lubrication | 5300 r/min |
| Ball diameter Dw | 30.162 mm |
| Number of balls z | 29 |
| Reference grease quantity Gref | 150 cm³ |
| Preload class A GA | 1650 N |
| Static axial stiffness, preload class A | 683 N/µm |
| Preload class B GB | 3300 N |
| Static axial stiffness, preload class B | 895 N/µm |
| Preload class C GC | 6600 N |
| Static axial stiffness, preload class C | 1189 N/µm |
| Preload class D GD | 13200 N |
| Static axial stiffness, preload class D | 1615 N/µm |
| Calculation factor f | 1.24 |
| Calculation factor f1 | 0.98 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.07 |
| Calculation factor f2C | 1.12 |
| Calculation factor f2D | 1.17 |
| Calculation factor fHC | 1.04 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 10.4 kg |